How to Reset TP-Link Extender

If you were looking for a way to successfully and efficiently reset your TP-Link extender but ended up more confused than ever, worry not. With the help of this article, we will equip you with all the necessary knowledge, and we will guide you step-by-step on how to reset TP-Link extender.

All you need to do is follow our directions carefully, and your extender will get reset and be ready to use in no time.

How to Reset TP-Link Extender

As there are a few solutions to reset a TP-Link extender, we have decided to simplify and explain the most popular and straightforward ones in detail. This way, even if you are unfamiliar with technical jargon and terms, you will still be able to successfully reset the TP-Link without needing professional help. 

Hard reset the TP-Link extender 

Before you proceed with this method, the first thing you will need to do is find the Reset button on your TP-Link extender. On some extender models, you can find this button on the back of the device, while on others, at the bottom of the device.

Then, after you find this button, you can press it with your fingernail or some non-metal object, such as a toothpick, and you will need to hold it for about one to two seconds while the device is powered on.

After that, the lights should start blinking, turning off, and then turning on again. These processes indicate that your TP-Link extender has been hard reset successfully and is ready to use again.

Read more: How to Reset a Netgear Extender

Console reset the TP-Link extender

Basic console reset

After successfully locating the reset button, as mentioned in the previous method, you may continue the steps to factory reset the TP-Link extender.

Step-by-step instructions

1. The first thing you will need to do is find some small object such as a toothpick, a pen, a paperclip, or anything else that is non-metallic and then press the reset button on the TP-Link extender device. Ensure that you hold this button pressed for about ten to fifteen seconds.
2. As the extender should be powered on before you press the reset button, you may release it after holding it long enough and seeing that all the lights are blinking.
3. Then, ensure you wait for about two to five minutes and reset it again.
4. After doing so, check the extender’s manual, documents, or label to see the credentials, such as username and password, for logging in to your extender’s dashboard again.

Factory reset by using the TP-Link extender dashboard

If you are looking for the safest way to reset your TP-Link extender, resetting it with the help of the dashboard can be the most suitable method. This method requires more steps than just pressing the reset key. However, you will at least be assured that by using this method, you will not be causing any potential hardware failure and therefore keep your TP-Link extender in optimal condition and excellent quality.

Step-by-step instructions

1. The first step to factory resetting the TP-Link extender is to power reboot the extender and the devices that you prefer to utilize while doing this method. Also, make sure to have a smart device or computer near you because you’ll need to use a browser to do this.
2. Next, open the browser on your preferred device, and in the search bar, enter the IP address and press Enter.
3. When your extender’s admin website opens, you’ll be required to enter your info, such as username and password, to sign in and change the options on the TP-Link extender dashboard. You can find this info in the documentation of your extender, or you can feel free to call your Internet provider service from where you have purchased your extender, as they have all the information you would need.
4. After logging in to your extender’s admin dashboard, go to the System Tools option and choose Backup & Restore.
5. Under this option, you’ll find the Factory Reset option and click on it. You must follow the on-screen instructions to factory reset your extender, which might take some time.
6. Lastly, after you’ve completed the instructions, reboot and configure the device again after the reset.

Reset TP-Link Extender Password

Many people find themselves in a situation where they want to access their link extender’s dashboard, but they’ve changed and forgotten their new password. In this situation, the Internet provider services most likely won’t be able to help you as they don’t have your new password(s). 

So, what you can do if this is the case with your extender is follow the instructions below.

1. Ensure that your extender is plugged into a power outlet.
2. Notice the power light on the front of the extender and ensure it does not blink but stays lit. 
3. If the power light is not on, find the power button on the sides of the extender or the LED button and press it to turn the extender on.
4. After you ensure that your extender is powered on, you’ll need to locate the pinhole, which you can usually find on the side where the reset button is.
5. Finally, insert a pin and press and hold the reset button until all the indicator lights switch off and on momentarily. After this process, your extender’s username and password should reset to factory default settings. You can sign in to your extender’s dashboard with the default credentials that came with it.

How to Know If Your TP-Link Extender Might Need Resetting

Now that you know how to reset the TP-Link extender, you might also want to read some not-so-known indicators when you may also need to reset your extender.

• Low or inconsistent Internet speed
• The extender does not want to turn on, although it’s plugged into a power outlet
• When your extender seems to lose connection constantly, and you need to reconnect to the Internet constantly

Conclusion

In this article, we’ve explained how to reset TP-Link extender by following our in-detail instructions. All you will need to do is choose the method that seems the most suitable for you, and we do not doubt that in no time, you will have your extender reset.