Whenever you face some problems with your router configuration, the first thing you can think of is to perform a factory reset. It is a functional tool for fixing any issue with your connection and troubleshooting errors. Even though it might not seem the easiest way to do it, it would be fairly simple for you if you follow our guide.
The first thing to remember before learning how to factory reset Orbi is that it can erase all your personalized settings, including the username and the passwords, so it is important to have everything stored beforehand. However, if this process fails, we have a few additional ways you can do it. Let’s get started and discover!
How to Factory Reset Orbi
To perform a factory reset on your Orbi router, first, you need to turn it on. Then, find the Reset button on the back of the router where all the ports are located. Push the button using an s toothpick or a straight paper clip, and wait for a couple of seconds until the power button starts flashing in amber color. Now, your device will be restored to factory settings.
However, before performing a factory reset on your Orbi router, you must be aware that this is a drastic measure, and you should only use it if there is no other solution for the problem. First, check the manufacturer’s documentation, see if your issue is listed there, and follow the recommendation to fix it.
Moreover, below we have included some of the possible ways you can try to factory reset Orbi, so let’s take a look.
Read more: How to Reset Asus Router
This is the most commonly practiced and simplest way to factory reset Orbi, recommended by Netgear as the most reliable method to revert your router to its factory configuration. It can resolve over 90% of network issues by removing all the settings, including the WiFi password, IP addresses, DNS details, etc.
- First, you must connect your router to the modem and power outlet, which must be turned on.
- Look for the Reset button between the colored ports and the cord connected to the power outlet on the back side of your router.
- If the button isn’t set outwards, you’ll need a sharp tool like a paper clip or toothpick to push it inside.
- Press and hold the button until it clicks, and hold for a couple of seconds; keep holding until you see the LED light of your router change colors.
- Wait for a couple of minutes for the process to complete
- At this point, your router is reverted to the factory configuration
Alternative way – “30-30-30”
If the above method fails, we recommend another alternative, and it is called the “30-30-30”. So, this is what you need to do:
- Power On your Orbi router and ensure it is working by checking the LED light.
- Now, find the Reset button on the back of your Orbi router and, using a paperclip, push it inside and hold for 30 seconds; don’t release the button.
- Turn off your router’s Power while still holding on to the Reset button.
- Now, turn on the router again using the Power On button.
- Press the Reset button for another 30 seconds.
- Finally, your device will perform a factory reset.
Factory reset through the web interface
If your Orbi router’s Reset button is broken or it doesn’t exist at all, then, in this case, the only solution is to use the option within its configuration interface.
Check your router’s manual to find the model, and then from the official website, find the corresponding manual according to the router model’s series. First, make sure that your router is receiving enough power supply, and then follow these steps:
- To find your router’s manual, you’ll need your router’s IP address, open the Windows settings, and find the Network & Internet option.
- View Network Properties and look for Default Gateway. The number next to it is your IP address; copy the IP address and place it in your search bar.
- You’ll be redirected to your own router’s admin settings; here, input the login details, and you will be able to access the corresponding model manually.
- From the menu, find the Factory Reset option, it can be labeled differently depending on the router’s model so look for either System or Settings.
- Next, find and click on the Factory Restore option.
- You are done; now, all your router’s configuration will be erased and reverted to its original preferences.
Contact Netgear team
The last resort in case nothing works is to contact tech support.
- First, disconnect all the calves from the Orbi router but leave the power cable.
- Turn on your Orbi and ensure it is working.
- Find the Reset button on the back of your Orbi router and hold it for a couple of seconds, don’t release it until you see the router’s LED light blinking.
- While still holding onto the Reset button, take the power charger off.
- Release the button and plug the router again while pressing the Reset button for a couple of seconds.
- Finally, release the button.
Conclusion
Well, we have come to the very end of this article. As explained above, those were the most functional steps how to factory reset Orbi. Generally, all these methods work efficiently for resolving various problems with connectivity.
However, you must know that in case of internal damage to your router, you must contact the support team. In this case, you’ll need to present your router warranty so they will be able to resolve the issue without paying any further charges.
Additionally, you can check the Netgear official website and look for the extensive board with information regarding the most commonly asked questions. We hope that you have found our article useful, and check our page for more content in this category.