For the Ring camera to work properly, it must be connected to the Internet. If the connection gets interrupted, the camera will stop working and continue when the Internet connection is restored. Therefore, maintaining the proper distance between these two is important.
If you place the devices too far from each other, you will encounter connection problems. To prevent that from happening, first, you must know how far the Ring camera can be from the router.
So, how far can Ring camera be from router? If you don’t know, you are in the right place, so let’s discover the proper distance and what you can do to improve the connection.
How Far Can Ring Camera Be From Router
The internet connection is crucial for the Ring camera to detect the motions and movements in front of and around it.
So, you must be careful about the distance between your Ring camera and your router because the connection might start losing if they are positioned too far from each other.
There is no set range for this, depending on your WiFi signal and router. Some users say that the distance between their outdoor Ring camera and their router is 60 feet (18 meters), and the camera works just fine.
You can try using that as a guideline, but know that it doesn’t mean that the same rule will apply to your devices too.
Maybe your WiFi signal is strong, so the distance between the router and the Ring camera can be more than 60 feet.
However, your WiFi signal may be weaker, so you must place these devices as closely as possible. Therefore, try placing them at different distances to see how the camera will work.
Additional information
There are many Ring cameras, but the model isn’t important. It also doesn’t matter how many Ring cameras you own. No matter any of these things, the strength of your WiFi signal is the most important thing, and if you don’t have WiFi, the Ring cameras won’t work.
The exception from this rule applies if you have the Ring Doorbell Elite or the Ring Stick-up Cam Elite, for which you don’t need WiFi. These devices work without it because they use an Ethernet cable that provides them with the Internet, which is why their connection is so stable.
If you use an indoor Ring camera, remember that the best thing you can do is place it in the same room as your router. If you have a Ring Doorbell, keep in mind that the distance shouldn’t be more than 30 feet (9 meters).
Also read: How to Fix a Weak WiFi Signal
How to Improve Bad Connectivity
Your Ring camera doesn’t work because it is too far from your router, your router’s firmware is outdated, or there are some physical obstacles in front of it. All these problems are easy to resolve, and improving the WiFi connection is simple.
- Buy a WiFi extender or WiFi booster if it is impossible to place the router and Ring camera closer. You can find different ones, but you can also purchase one from Ring. Getting an extender will extend the WiFi signal and make it possible for the larger area to be covered.
- If the problem is with the firmware, you should update it. Just enter the IP address into your web browser, log in, and check if there’s a new, available firmware version. If there is, click on it and install it.
- Check that the router isn’t placed under or behind something that might be blocking the WiFi signal. If there are some bigger objects between your router and your Ring camera, remove anything that you suspect obstructs the router’s WiFi signal.
- If the connection suddenly worsens, you can reset the router. Just unplug the device from the outlet, plug it back in after a few minutes, and the connection should be better.
Read more: Why Does My Router Keep Disconnecting?
How to Test the Ring Camera Using the Ring App
If you want to be sure that the problem with your Ring camera arises from your router, it is best to test your WiFi connection.
The recommended internet speed for the fastest connection is 2 Mbps, so if it is less, you might encounter problems with the connection. You can check that very easily by using the Ring app on your phone, so let’s see exactly how you can do that.
Firstly, you should connect your phone to the same network your Ring camera is connected to. Then, open the Ring app and tap “Options”, which you can find by clicking on the three lines in the top left corner. Tap on “Devices” and search for your camera. Find it, tap on it, select “Device health,” and tap on “Test your WiFi” to run the test.
That’s it, so it is pretty simple, right? This test will show you your internet speed, so you will see if that’s the reason why your camera keeps disconnecting.
Conclusion
Now, as you have learned how far can Ring camera be from router and that everything depends on your router and the strength of your WiFi signal, setting up your Ring camera should be easy.
Of course, the stronger the WiFi signal your router has, the better connection you will have, so be careful. Measure the distance and ensure that the devices aren’t too far from each other because they should be as close as possible to avoid experiencing interruptions in the connection.
If you still have a bad connection, now you also know what you can do to improve it. Simply use the tips in this article and allow yourself the ultimate protection of your home. For example, if the connection between the two devices is bad, you can change the location of your router and place it a bit closer to your Ring camera.