Computers can be configured to obtain an internet protocol address automatically. However, sometimes after you change the IP address of your network gateway, you will need to renew and release it to access the router. Sit tight if you don’t know how to renew an IP address.
In our article below, you can find a detailed guide on how to do it. Thus, let’s get started and discover more!
How to Renew an IP Address
When troubleshooting IP problems, the first step is acquiring a new address in your work office or home network.
You can try and restart the router. By restarting, we mean unplugging and plugging back the power cable. In most cases, you don’t have that option for accessing the SU network; therefore, you will need to manually renew and release the Internet Protocol address.
Every computer connected to a network uses an IP address to communicate with other devices and be identified. While some addresses are set manually, others are assigned by a server running the service called DHCP – Dynamic Host Configuration Protocol.
The process of obtaining an assigned IP address usually happens automatically, but in some scenarios, this operation does not proceed as expected.
Therefore, troubleshooting network connectivity issues may require a DHCP lease or an assigned address for a predetermined time frame, in addition to renewing and leasing an internet protocol address.
Something to be extra careful about is if the setup requires and only operates with a static IP address. In that case, you can call for assistance from professionals. This happens in reserved servers and is not for your typical laptop or desktop experience.
On a router
First, if you decide to tell your router to renew its IP address, you will quickly lose the connection to the Internet. Since the router is responsible for distributing a connection to all of your devices, they will also be left internet free for a while. To renew and release the IP address, you must log into your router using administrator privileges and enter the admin login info.
Depending on the model, each router has a different system menu. You need to search for the zone that shows the status of your internet connection. Click on Advanced, and under the Internet Port, you can see the Connection Status. Next, you will be transferred to a new window that shows the current status of your router’s connectivity.
In this tab, at the bottom, there are Renew and Release buttons. To renew the IP address, you first have to Release it so that your current Internet Protocol Address is stored in the ISP. The Renew button is next and will allow your router to receive a new address from the ISP.
Once a new address appears, you are back online, and your network connection is successfully restored.
Read more: How to Find the IP Address of a Router
On Windows
Regardless of the operating system that you are using, it can be XP, 7, 8, or 10; the process of renewing an IP address is similar, if not the same.
First, launch the command prompt, but don’t worry; it is not that complicated. We understand that people are sometimes afraid when they need to write a little bit of code, but this process can be done without any hassle.
In the command windows, type ipconfig/release. Afterward, you will see a message list that shows your disconnected status. You should not be alarmed since this is normal. Again, type ipconfig/renew. After this command, your router will receive a request from the network adapter and respond by assigning a new and fresh IP address.
If you scroll down to the bottom of your message list, you will see that your computer has a new, freshly assigned Internet Protocol Address.
After the renewal operation, you may need to restart your computer if you still have trouble connecting to the Internet.
On MAC
This process is similar to Windows, but instead of using the command prompt for renewing and releasing an IP address, you need to access the TCP/IP settings.
On MAC, select the Apple button and find the System Preferences menu. Next, you must access the Internet and Network icon and see the TCP/IP tab. On the right side of the newly opened window is a Renew DHCP Lease button. The only thing left is to click on it, and you are done. Select OK, so your current settings are saved, and close every tab.
Like with Windows, if you have some connectivity issues afterward, it is advisable to restart your system.
On Mobile
Android
We saved the best for last, and we need your full attention here because acquiring a new IP address on Android is not that simple. Starting off, you need to convince or force your phone to “forget” the current Wi-Fi network to which it is connected.
Afterward, the phone will show its IP address and current connection. From here on out, you can continue to renew and obtain a new address.
If you are an Android user, you need to go to Settings and find Connections. Select Wi-Fi, and on the Gear icon on the right of the available wireless networks, you can see the Connected status. This is where you tap the Forget icon. The Wi-Fi connection will be brought back to the router.
The next time you log in and reconnect with your Wi-Fi credentials, the mobile will receive a fresh new IP address.
iPhone
The renewal operation is a lot easier on the iPhone. You only need to enter the Settings menu and tap on Wi-Fi. On the right side of your wireless network, tap the “i” icon. In the pop-up window, tap the Renew and Release buttons, and you are done.
Also read: How to Find My Router IP Address From Mobile
Conclusion
Releasing and renewing your IP address can solve your connectivity problems. We are confident that our explanation of how to renew an IP address on every device was simple and understandable. Good luck!