How to Reset Arris Router

Many people, with time, start to have problems with their routers, whether Arris or other popular brands. We have researched the market and discovered that people have issues resetting their Arris router. 

Therefore, we have created this article to provide the needed help. Let’s check out how to reset Arris router and all the possible ways you can try it!

How to Reset Arris Router

If the router does not perform as said in the features section, then you need to make a reset in cases where that didn’t help; also, you can choose some of the alternative ways listed in this article or choose to use the warranty.

Usually, a power cycle reset will solve internet speed or other similar problems. However, you can factory reset your Arris router to restore it to the factory settings if it’s performing strangely or if you’ve lost your password. It’s a dramatic step to reset a router to its basic settings. This procedure is, however, occasionally necessary. So, let’s check out the types of resetting!

Types of Resetting

Power cycle reset

Power cycle resets are the least difficult kind of reset. It reboots your modem when there is a power outage, momentary glitch, or malfunction. The steps for a power recycling reset are listed below.

1. Disconnect the Arris router’s power cord.
2. Disconnect the ethernet cable from the PC and router.
3. Watch for the modem’s power to fade.
4. Attach the router’s power cord after a short while.
5. Connect the modem to the Ethernet cable by connecting it to the Ethernet port.
6. Before you connect to the Internet, give the reboot process a minute.
7. When the modem light blinks, your router is connected to the Internet.
8. Testing the Internet network is the final stage.

Factory reset Arris router

It could be time to do a factory reset on your Arris router or modem if your network is running slower than usual. You can significantly improve performance on the network by reverting to factory default settings. Arris makes it simple to reset their devices by offering two different techniques:

• Software reset
• Hard Reset

We should note that a factory reset would erase any configuration data saved in the router to enable an internet connection. Use the reset option only if you have a backup file or all the configuration details to restore the settings to get the internet working again.

From Web interface (Soft reset)

• You can utilize the Arris network (WiFi or cable).
• You are aware of the router’s Arris default router Ips IP address.
• Your router’s password is known. Arris router default passwords.

We can start resetting your Arris router after you have everything you need from the checklist. To access your Arris network:

1. Log in.
2. Use your phone or computer to establish a connection to your wireless or wired network.
3. Visit the IP address of your router in a web browser.

Place the following into your browser by typing it in or pasting it: http://192.168.0.1. It is the IP address of the Arris router that is used to access the control panel. Try one of these additional Arris IPs if the previously mentioned address is ineffective:

• http://192.168.100.1
• http://192.168.1.1
• http://192.168.254.254
• http://192.168.1.254
• http://192.168.7.254
• http://10.0.0.1

Type the router’s default password. Use the following default Arris username and password when you reach the Arris router login page to connect:

• username: admin
• password: password.

Reset button

You will need:

• Physical access to the Arris router.
• A paperclip or similar sharp object. 

On your Arris modem or router, find the Reset Button (typically found on the back of the device).

1. Make sure the router is turned on.
2. You should press and hold the reset button for around 15 seconds.
3. Hold the reset button in place until the LED lights begin to flash.
4. Allow the LED lights to start lighting up generally after about a minute.

Read more: How to Reset Asus Router

What Happens When You Factory Reset the Arris Router?

The router’s settings will return to their defaults after being reset. The router will lose all its unique settings, including wireless security and SSID.

Important: You must save a backup file if you wish to restore the router’s default settings without reconfiguring it.

How Often Should You Reset Your Router

Rebooting your router or wireless gateway once a month will help to renew your wired and wireless connections and clean out your router’s memory.

Restarting your router can clear away undesirable devices from your network, stop harmful attacks on it, and reset your connection settings. You can fix numerous connectivity and speed difficulties by restarting your router.

Alternate solutions for Arris router reset

If resetting the router using a power cycle reset, the online user interface or reset button will not work, then it is a hardware issue. It might also suggest that the Ethernet or power cables are broken.

Before attempting to troubleshoot such problems, you must ensure that the Ethernet cables and power cords are securely connected and undamaged. You must purchase new power cords and cables to replace those harmed or corrupted. Your router has a hardware issue if all of the hardware is working correctly.

Additionally, plug the power cord into a trustworthy power source to guarantee a constant power supply. A warranty or repair insurance is frequently included with routers. If your modem has no warranty or repair policy, you will need to buy a new one.

Also read: How to Reset Modem

Conclusion

Well, we have come to the very end. So, we hope we have provided you with enough options about how to reset Arris router. 

Overall, use power cycle reset if you notice problems with speed. If that doesn’t work, as we mentioned, it is an excellent practice to factory reset your router once a month.

Routers deteriorate with time. You can reset them to restore lost internet speed. Therefore, using one of these three factory reset methods can help you increase internet speed, widen your wifi coverage, and improve connectivity.

Best of luck!