How to Connect Landline Phone to WiFi Router

You might be wondering whether you’ll need to contact a professional to connect a landline phone to a WiFi router, but since you are here, you have come to the right place. You don’t need to pay a technician for something so simple since we have created a guide on how to do it independently, even if you don’t have many tech skills. 

Even though landline phones seem to be long gone in history, they can be incredibly functional if you are willing to transfer the speech signal into a digital form. Connecting your landline phone to a WiFi router isn’t too complicated if you have a little patience. Thus, let’s discover how to connect landline phone to WiFi router in the easiest way possible.

How to Connect Landline Phone to WiFi Router

How to Connect Landline Phone to WiFi Router 

An Ethernet cable is the quickest way to connect a landline phone to a WiFi router. This is what you need to do: 

  1. Turn off the router but keep the wires in.
  2. First, connect your router and model using an Ethernet cable.
  3. Take another Ethernet cable and place it in your LAN port, and connect the other end to your PC.
  4. Finally, connect your analog home phone with a cable by placing the phone adapter in the router’s port labeled Phone 1.

Establishing Network Connection Through Router

Step 1: Power off your router 

Before we start the process, you’ll need to power off your router. Do this by pressing the Power off button; however, don’t unplug any cables just yet since you might find it confusing to recognize the ports later. 

Step 2: Unplug all the electrical devices for safety 

Since we will be working with electricity, it’s crucial that you stay safe, which is why you need to unplug both the router and the modem from the power outlet. Now when you have turned off your router, you can take off the cords and follow the next step.

Step 3: Create a connection between the devices 

Now you’ll need two Ethernet cables. The first one you will use is to connect the landline phone to your WiFi. Find the Ethernet port located on the back of your router while the other end places it in the corresponding port in your modem. 

Using the second Ethernet cable connects the router to the PC. Connect one of the ends to the LAN port on the backside of your router while the other end is placed in the Ethernet port on your PC. 

Step 4: Connect your landline phone to the WiFi router 

The most complicated part of the process is almost over; now, you need to create a connection between your router and your landline phone using a cable. Take the adapter and place it on the back of the router that is labeled as Phone 1.

Step 5: Set up the network 

We are almost set. Finally, we will make the connection between the phone and the router. Take the landline phone cable and place it on the back of your router in the Phone Adaptor port, usually labeled as Phone 1. 

Step 6: Turn on the devices and check the network 

Now turn on the devices and see if they’re the network is working. You can do this by checking the LED lights. The connection is set if they are steady and aren’t blinking. 

You can also make a check by making a test call. The most accurate way to do this is if the dial tone works; however, you must know that your internet connection speed can also cause problems.

Read more: How to Connect a Router to a Modem Wirelessly

Common Problems That Might Arise 

Available connection without a dial

If you notice a network connection on the router but no dial, you need to check whether there are any loose wires and try reconnecting them with the jacks. If the problem is still there, try disconnecting the phone cable and plugging it into a different jack. Another potential reason your network is working but you cannot dial is due to some hardware fault.

Solution

  • If you are sure there is nothing wrong with the network provider, try another phone instead. If you still have the problem, then the reason can certainly be because of some wiring fault.
  • Since the phone adapter is responsible for supplying your phone with the network, replace it with a new phone cord. 
  • Check the phone cables, find the short cable tie that goes into the Ethernet transmitter, and inspect if there are any visual faults. 

The router doesn’t have a phone port

Some routers come without a phone jack; in this case, you’ll need to connect a coaxial cable line to the cable modem to convert the Ethernet signal. If your router is compatible, it is recommended to use ATA by plugging it into the router and then connecting the landline to the ATA.

Bad connection speed 

The quality of your connection and the Internet speed has a crucial influence on whether you can have a network between the two devices. You might face problems if your internet connection is slower than 400 Mbps.

Also read: How to Connect Ethernet Cable to a Wireless Router

Conclusion

Even with all the smart devices nowadays, the landline phone seems like ancient technology, but they still have certain benefits in your home. So, we hope you have learned how to connect landline phone to WiFi router in the easiest way, through an Ethernet cable.

Another alternative method is connecting your landline phone with the modem if the previous one fails. To set up, you’ll need to plug the phone network cable into the modem and then connect both devices through a DECT cable. After completing this, your modem will deliver a signal, and you can check if it works by dialing a call. 

If there are any issues, check our section for the most common problems and implement the necessary steps.

Leave a Comment