How to Setup Linksys Router

Even though it might sound like a job for an IT professional, we did our best to give the simplest guide on how to setup Linksys router the easiest way. 

Most importantly, you’ll need your modem and router connected to the power output, and then all you need to do is to open your admin setting and input the credentials. So, let’s get started and discover!

How to Setup Linksys Router

If you are confused and feel like you have entered a spaceship, don’t be because we will present you with the most simple steps to set up a Linksys router. It can require a little more of your attention and patience. So, here are the steps you should follow:

Step 1: Set up the router 

Connect the router with the power adapter that comes along with your router through the router’s input, usually located in the rear. Connect the adapter to the power source like an outlet, then turn on the router power. 

Step 2: Connect the router and the modem 

To be connected to the Internet, you must connect your router to the modem. All you need to do is take an ethernet cable and plug it into the Internet port on the router; then, on the other end of the cable, plug it into the modem port; usually, it comes in yellow. 

Wait a couple of minutes for them to connect. Now turn on your computer. Once set, you’ll see a new network named “Linksys” appear in the available wireless connections, the new network to which you will connect.

Now find the password key on your router’s box and enter it to connect to the new Linksys network. Check whether there is a network and ensure the connection speed is good.

Step 3: Login your Linksys router 

Open the browser you are using; we recommend Chrome or Safari; however, if the speed is good, you can use any other browser. In the address field, type in the number 192.168.11. 

That is the most common IP address for all Linksys routers; however, if it doesn’t work, then search for your specific Linksys router number on the official website whatsmyrouterip.com 

When you enter the Linksys setup site, you’ll need to type in the Username and password to log in. Try with the default credentials that are ‘admin’ for the Username, leaving the password field blank.

Additional tip

If it doesn’t log in, visit the default Linksys credentials website and find your router model; the appropriate credentials will be listed below its name.

Step 4: Configure and secure your Linksys router 

When you access the admin page of your Linksys router, the rest is a fairly easy task. From here, find and access the Configuration option. 

Since all the routers come with a default password and Username, you want to change them using your unique password to avoid unwanted visitors accessing and stealing your network. To secure your Linksys router from vulnerabilities and unwanted access, this is what you need to do:

Read more: How to Reset a Linksys Router Password

Choose your name and password credentials 

The best way to protect your network from unwanted access is to change the default credentials with your own. You can do this by navigating to the setup page. 

We recommend making your password at least about 20 characters long using numbers, letters, and special characters. This will make it difficult for hackers to access your Linksys Wi-Fi.

Enable a firewall

The most effective way to protect your Wi-Fi from unwanted traffic and access to your private data is to enable a firewall. They aren’t used only as a security application but can also help add an extra layer of protection to your network.

To do this, configure your firewall to disable printer and file sharing. Then, the next thing you want to do to prevent hackers from accessing your private data is to enable stealth mode. 

The most important thing to keep in mind is to update your firewall software regularly so it will regularly notify you about any potential threats, and there won’t be any loopholes in the security. 

Also read: How to Configure Router

Setup an ACS (Access Control List)

One of organizations’ most commonly used methods to protect unwanted access is setting up an Access Control List. This means that you can make your list of who will be able to access your network, and they can be made specific to a certain source, like an IP address or destination port. You can also disable public access. To configure your Access Control List, follow these steps:

1. Open your Computer System and find the list of users.
2. Select one user you wish to configure, and the setting will appear on the screen.
3. Switch to the Access Control tab, and you’ll get a list of the trusted IP addresses.
4. If you want to remove a certain IP address, click on the name and then click on the Delete option.
5. The same rule applies to adding a new IP address to your trusted list; click on the Add New ACL and then input the IP address information; add a description if you want to be able to recognize it more easily.

Conclusion

Setting up your network connection alone might sound daunting; however, you can still do it without much hassle, even if you are non-tech savvy. Linksys routers have a pretty simple and very well-explained configuration that, most of the time, comes with extensive instructions on the packaging. 

However, we hope you have learned how to setup Linksys router, so you don’t have to bother reading additional instructions. 

Another tip you might find helpful if you have trouble accessing your wizard is resetting your router. Do this by pressing the Reset button for a couple of seconds. Then, unplug your power cord from the power outlet for a couple of seconds and plug it back in.